|
|
1. Remove the round black patch on the
side of the cartridge facing up by using a sharp tool such as an exacto-knife
or razor blade.
|
|
|
|
|
2. Push the ball into the cartridge
using the ink bottle cap designed for this purpose.
|
|
|
|
|
3. Insert the refill dispensing tip of
the ink bottle deeply into the refill hole that you have just made and
refill proper amount of ink by squeezing the bottle slowly.
|
|
|
|
|
4. After refilling is complete, seal
the refill hole with specifically designed green rubber plug which may
be found on top of the air-balancing clip.
|
|
|
|
|
5. Insert the air injector into the
air-balancing clip and remove 2ml of ink out of the cartridge. Wipe off
any ink on the cartridge nozzle after taking the cartridge out of the
air-balancing clip and install the cartridge into the printer.
|
