 |
1. Use a
ball point pen to push the caps down into the body of the cartridge so
that the sponge may be seen inside. It is only necessary to be able to
insert the dispending needle into this hole. |
|
 |
2. Remove
the cap of the ink bottle by twisting it counter clockwise. Attach the
refill dispensing needle to the ink bottle. |
|
|
3. Insert
the needle at an angle toward the print head nozzles as far as it will
go and inject ink into the cartridge. |
|
|
4. Inject
ink as slowly as possible. |
|
|
5. Wipe any
excess ink or foreign material from the print head nozzles, install the
cartridge into the printer and run the "Head cleaning"
utility. |
